Connect with us

Hi, what are you looking for?

World

Tunisian startup 3D prints solar-powered bionic hands

-

A Tunisian startup is developing a 3D-printed bionic hand, hoping the affordable and solar-powered prosthetic will help amputees and other disabled people across Africa.

Unlike traditional devices, the artificial hand can be customised for children and youths, who otherwise require an expensive series of resized models as they grow up.

The company Cure Bionics also has plans to develop a video game-like virtual reality system that helps youngsters learn how to use the artificial hand through physical therapy.

Mohamed Dhaouafi, the 28-year-old founder and CEO of Cure Bionics, designed his first prototype while still an engineering student in his home city Sousse.

"One team member had a cousin who was born without a hand and whose parents couldn't afford a prosthesis, especially as she was still growing up," he said.

The bionic hand is made of Lego-like parts that can be replaced if damaged or to match a child'...
The bionic hand is made of Lego-like parts that can be replaced if damaged or to match a child's physical growth
Bechir TAIEB, AFP

"So we decided to design a hand."

Dhaouafi launched his start-up in 2017 from his parents' home, at a time when many of his classmates chose to move abroad seeking higher salaries and international experience.

"It was like positive revenge," he told AFP. "I wanted to prove I could do it. I also want to leave a legacy, to change people's lives."

Dhaouafi pointed to hurdles in Tunisia, where it can be hard or impossible to order parts via large online sales sites. There is a lack of funding and, he said, "we lack visionaries within the state".

But by pooling money raised through sponsored competitions and seed investment from a US company, he was able to recruit four young engineers.

They are now fine-tuning designs, writing code and testing the artificial hand.

- 'Climb like Spiderman' -

The device works with sensors attached to the arm that detect muscle movement, and AI-assisted software that interprets them to transmit instructions to the digits.

Tunisian engineer Mohamed Dhaouafi  who launched his start-up in 2017 from his parents' home  h...
Tunisian engineer Mohamed Dhaouafi, who launched his start-up in 2017 from his parents' home, holds a prototype of an artificial hand
Bechir TAIEB, AFP

The hand itself has a wrist that can turn sideways, a mechanical thumb and fingers that bend at the joints in response to the electronic impulses.

To teach youngsters how to use them, Cure has been working on a virtual-reality headset that "gamifies" the physical therapy process.

"Currently, for rehabilitation, children are asked to pretend to open a jar, for example, with the hand they no longer have," said Dhaouafi.

"It takes time to succeed in activating the muscles this way. It's not intuitive, and it's very boring."

In Cure's version, the engineer said: "We get them to climb up buildings like Spiderman, with a game score to motivate them, and the doctor can follow up online from a distance".

3D printing meanwhile makes it possible to personalise the prosthesis like a fashion accessory or "a superhero's outfit", said Dhaouafi.

Cure hopes to market its first bionic hands within a few months, first in Tunisia and then elsewhere in Africa, where more than three-quarters of people in need have no access to them, according to the World Health Organization.

"The aim is to be accessible financially but also geographically," said Dhaouafi.

The envisaged price of around $2,000 to $3,000 is substantial, but a fraction of the cost of bionic prostheses currently imported from Europe.

- 'Leapfrog technology' -

Cure also aims to manufacture as close as possible to the end users, with local technicians measuring the patients and then printing individually fitted devices.

Tunisian engineers test a prototype of an artificial hand  which they hope will be produced at a low...
Tunisian engineers test a prototype of an artificial hand, which they hope will be produced at a lower price than existing prostheses
Bechir TAIEB, AFP

"An imported prosthesis today means weeks or even months of waiting when you buy it, and again with each repair," the inventor said.

The bionic hand is made of Lego-like parts that can be replaced if damaged or to match a child's physical growth.

It can also be solar-powered via a photovoltaic charger for use in regions without a reliable electricity supply.

The 3D printing of rudimentary prostheses started about a decade ago and is becoming standard.

It is not a magic solution because specialised medical know-how is still crucial, said Jerry Evans, who heads Nia Technologies, a Canadian non-commercial organisation that helps African hospitals manufacture 3D-printed lower limbs.

"3D printing is still in its early stages," he said, "but it is a major game changer in the field of prosthetics and orthotics."

"Developing countries will probably leapfrog to these technologies because the cost is much lower."

A Tunisian startup is developing a 3D-printed bionic hand, hoping the affordable and solar-powered prosthetic will help amputees and other disabled people across Africa.

Unlike traditional devices, the artificial hand can be customised for children and youths, who otherwise require an expensive series of resized models as they grow up.

The company Cure Bionics also has plans to develop a video game-like virtual reality system that helps youngsters learn how to use the artificial hand through physical therapy.

Mohamed Dhaouafi, the 28-year-old founder and CEO of Cure Bionics, designed his first prototype while still an engineering student in his home city Sousse.

“One team member had a cousin who was born without a hand and whose parents couldn’t afford a prosthesis, especially as she was still growing up,” he said.

The bionic hand is made of Lego-like parts that can be replaced if damaged or to match a child'...

The bionic hand is made of Lego-like parts that can be replaced if damaged or to match a child's physical growth
Bechir TAIEB, AFP

“So we decided to design a hand.”

Dhaouafi launched his start-up in 2017 from his parents’ home, at a time when many of his classmates chose to move abroad seeking higher salaries and international experience.

“It was like positive revenge,” he told AFP. “I wanted to prove I could do it. I also want to leave a legacy, to change people’s lives.”

Dhaouafi pointed to hurdles in Tunisia, where it can be hard or impossible to order parts via large online sales sites. There is a lack of funding and, he said, “we lack visionaries within the state”.

But by pooling money raised through sponsored competitions and seed investment from a US company, he was able to recruit four young engineers.

They are now fine-tuning designs, writing code and testing the artificial hand.

– ‘Climb like Spiderman’ –

The device works with sensors attached to the arm that detect muscle movement, and AI-assisted software that interprets them to transmit instructions to the digits.

Tunisian engineer Mohamed Dhaouafi  who launched his start-up in 2017 from his parents' home  h...

Tunisian engineer Mohamed Dhaouafi, who launched his start-up in 2017 from his parents' home, holds a prototype of an artificial hand
Bechir TAIEB, AFP

The hand itself has a wrist that can turn sideways, a mechanical thumb and fingers that bend at the joints in response to the electronic impulses.

To teach youngsters how to use them, Cure has been working on a virtual-reality headset that “gamifies” the physical therapy process.

“Currently, for rehabilitation, children are asked to pretend to open a jar, for example, with the hand they no longer have,” said Dhaouafi.

“It takes time to succeed in activating the muscles this way. It’s not intuitive, and it’s very boring.”

In Cure’s version, the engineer said: “We get them to climb up buildings like Spiderman, with a game score to motivate them, and the doctor can follow up online from a distance”.

3D printing meanwhile makes it possible to personalise the prosthesis like a fashion accessory or “a superhero’s outfit”, said Dhaouafi.

Cure hopes to market its first bionic hands within a few months, first in Tunisia and then elsewhere in Africa, where more than three-quarters of people in need have no access to them, according to the World Health Organization.

“The aim is to be accessible financially but also geographically,” said Dhaouafi.

The envisaged price of around $2,000 to $3,000 is substantial, but a fraction of the cost of bionic prostheses currently imported from Europe.

– ‘Leapfrog technology’ –

Cure also aims to manufacture as close as possible to the end users, with local technicians measuring the patients and then printing individually fitted devices.

Tunisian engineers test a prototype of an artificial hand  which they hope will be produced at a low...

Tunisian engineers test a prototype of an artificial hand, which they hope will be produced at a lower price than existing prostheses
Bechir TAIEB, AFP

“An imported prosthesis today means weeks or even months of waiting when you buy it, and again with each repair,” the inventor said.

The bionic hand is made of Lego-like parts that can be replaced if damaged or to match a child’s physical growth.

It can also be solar-powered via a photovoltaic charger for use in regions without a reliable electricity supply.

The 3D printing of rudimentary prostheses started about a decade ago and is becoming standard.

It is not a magic solution because specialised medical know-how is still crucial, said Jerry Evans, who heads Nia Technologies, a Canadian non-commercial organisation that helps African hospitals manufacture 3D-printed lower limbs.

“3D printing is still in its early stages,” he said, “but it is a major game changer in the field of prosthetics and orthotics.”

“Developing countries will probably leapfrog to these technologies because the cost is much lower.”

AFP
Written By

With 2,400 staff representing 100 different nationalities, AFP covers the world as a leading global news agency. AFP provides fast, comprehensive and verified coverage of the issues affecting our daily lives.

You may also like:

Tech & Science

Google consumed 56 times more electricity last year to keep its global operations running than ChatGPT uses annually to handle user prompts.

Entertainment

Emmy award-winning actors Eric Martsolf ("Days of Our Lives") and Eva LaRue ("The Young and The Restless" and "General Hospital") star in the short...

Tech & Science

Civil society organizations will call on major tech firms to bolster their AI policies to combat "sexist and misogynistic" disinformation.

Life

Smoking is responsible for roughly 85 percent of all cases of lung cancer, the deadliest cancer worldwide.